The MR33 Magic Caddy Box for 1:10 on-road springs and stabilisers makes sorting, transporting and organising them a whole lot easier. Naturally, Michel from BoomRc has once again worked a bit of «MAGIC» into the design…
A total of 6 pairs of springs (12 individual springs) fit into the box, where they are stored safely and neatly.
It accommodates all currently (2026) standard short springs from cars such as the Mugen MTC-3, Xray X4 (25/26), ARC A11, and Schumacher Mi9/10. The maximum length of the springs should not exceed 18-19mm. The inner diameter of the spring should be approx. 14 mm, the outer diameter approx. 16.5–17 mm.
MAGIC is used for storing the stabilisers. As shown in the picture, the stabilisers are simply placed on the small raised section in the middle of the box. There is an integrated magnet there which magically holds the stabilisers in place. Two further magnets are attached to the edges, where the two ends of the stabilisers touch the base of the box. This ensures the stabilisers are held securely in place and are always available and ready for use.
All in all, the Magic Caddy Box from MR33 is the perfect companion in your bag and keeps your springs and stabilisers organised!
| Vekt | 100 g |
|---|---|
| Dimensjoner | 10 × 10 × 3 cm |
Brand
MR33
Relaterte produkter
