Our MXLR FAN BOOSTER is designed to level up your cooling game!
Simply connect the FAN BOOSTER via the JR Servo Plug with your receiver, plug your Fan into the FAN BOOSTER and experience the difference!
This small device transforms the 6V of your receiver to 8V output, which will increase the speed of your fan and by this the cooling ability! This leads to less fading, more consistency and by this more speed over run time. Simple huh ?
The MXLR FAN BOOSTER comes in a lightweight alloy case, with one JR Servo Plug to connect to the receiver and one female JST connector to plug in the fan. Clearly all wires and plugs are black!
The unit weights 4,5g. and has the following case dimensions:
24,20mm long / 13,20mm wide / 6,2mm high
Wire legth: 29,50mm (to receiver) / 41,50mm (fan connector)
Max Voltage input: 8.0V
Min Voltage input: 4.0V
IMPORTANT NOTICE:
– make sure your used cooling fan can work/operate at 8,0V !!!
– always check the polarity before plugging in the booster / fan !!!
– we recommend to use this FAN BOOSTER only with ESC’s that provide stable BEC voltage !!!
| Vekt | 4.-5 g |
|---|---|
| Dimensjoner | 3 × 2 × 1 cm |