-
With the Magic Repair Glue from MR33, the quick repair of various things becomes child’s play.
Especially for repairing small cracks or kinks on RC car bodies, the Magic Repair Glue is perfect.
However, the glue can also be used to glue together parts made of plastic, carbon fiber, and other materials.An important property of Magic Glue is its flexibility.
Unlike a usually very hard and brittle superglue, the Magic Glue always remains somewhat flexible.
Therefore, it is especially for patching and repairing your car bodies the ultimate weapon.The glue can be applied with the enclosed glue tip very clean and neatly dosed.
MR33`s Magic Glue has a great consistency. It is not too thin (hardly runs) and not too tough like ShoeGoo.This glue is designed to be used with the UV light from the Magic Glue SET (MR33-MRG-SET)
Features of the MR33 Magic Repair Glue:
- The perfect repair glue for the modeling field
- Especially suitable for Lexan bodies
- Very good dosage due to optimal viscosity
- Reclosable bottle
- Produced by ORCA
- Contents: 15g Magic Glue
Danger warnings:
- The glue must always be kept out of reach of children!
- If the eyes or mucous membranes come into contact with the glue, an immediate visit to the doctor is recommended!
- Never look directly into the switched-on UV lamp!
- Always close the adhesive well after each application!
-
It’s important to keep the weight and by this the center of gravity as low as possible to achieve the best performance.
As the wing mounts are naturally placed on a high position of the bodyshell, every gram of weight you save in this place is a performance gain.Our LW Wing Bolts are made of PA plastic in white/cream color.
The material has great properties such as strength and elasticity to survive even hard crashes without damage.
Downside of the screws = it’s rather easy to over tight the nuts and skip the thread of the screw. Please be gentle at tightening! We recommend to add a second nut (we include enough) on every screw to create a «double nut»-bonding.
For this reason we included two nuts for every screw.SUPER LIGHTWEIGHT -> 2 screws + 4 nuts = 0,4 gram
MAX-05-004 contains:
10x M3x8 PA LW Wing Screw
20x M3 PA LW Wing Nut -
Med dette verktøyet er det en lek å lage korrekte hjulbuer på din 1:10 Touring og FWD
En mal som gjør det enkelt å sette en fin bue med en tusj, for å lettere klippe en perfekt bue.
Verkøtyet er solid 3d printet i PLA +.
-
Med dette verktøyet er det en lek å lage korrekte hjulbuer på din 1:12.
En mal for bakhulet og en for fremhjulet gjør det enkelt å sette en fin bue med en tusj, for å lettere klippe en perfekt bue.
Verkøtyet er solid 3d printet i PLA +.
-
With the Magic Repair Glue from MR33, the quick repair of various things becomes child’s play.
Especially for repairing small cracks or kinks on RC car bodies, the Magic Repair Glue is perfect.
However, the glue can also be used to glue together parts made of plastic, carbon fiber, and other materials.An important property of Magic Glue is its flexibility.
Unlike a usually very hard and brittle superglue, the Magic Glue always remains somewhat flexible.
Therefore, it is especially for patching and repairing your car bodies the ultimate weapon.The glue can be applied with the enclosed glue tip very clean and neatly dosed.
MR33`s Magic Glue has a great consistency. It is not too thin (hardly runs) and not too tough like ShoeGoo.Now comes the real highlight: The included, small UV lamp!
With this lamp, the applied Magic Glue is irradiated for a few seconds (about 10 seconds, depending on the amount of glue) from about 5cm.
The glue hardens immediately, but without losing its slight flexibility.
A brilliant matter that you will certainly not want to miss in the future!Features of the MR33 Magic Repair Glues:
- The perfect repair glue for the modeling field
- Especially suitable for Lexan bodies
- Due to optimal viscosity very easy to dose
- Reclosable bottle
- UV lamp for fast hardening of the glue
- Convenient charging of the UV lamp via USB connection (USB-C)
- MR33 Hardcase in cool look for safe storage
- Made by ORCA
- Content: 15g Magic Glue
- Scope of delivery: Magic Glue, glue tip, UV lamp, hardcase bag
Danger warnings:
- The glue must always be kept out of reach of children!
- If the eyes or mucous membranes come into contact with the glue, an immediate visit to the doctor is recommended!
- Never look directly into the switched on UV lamp!
- Always close the adhesive well after each application!
Technical specificationBody Shell Accessories: Body Protection / Repair -
The MR33 Body Stiffener is the perfect solution for lateral stiffening of touring car bodies.
Especially when using lightweight 0.4 or 0.5mm bodies, body stiffening has become a MUST HAVE.
Especially on outdoor tracks, the vehicles are often exposed to strong winds, or even violent bumps.
The unwanted «sideways folding» of the body is prevented with the MR33 Body Stiffener.The special feature of the MR33 Body Stiffener is the ultra-flexible material at the base center part.
It adapts to the original shape of the body roof very easily when glued on, and prevents a change in the original shape of the roof.
At the sides of the body, the Stiffener can be attached either with double-sided adhesive tape, or with screws.Weight of the MR33 Body Stiffener: approx. 1.7g
Technical specificationBody Shell Accessories: Body Clips, Body Protection / Repair, Mounting Systems -
The MR33 Body Fitting Set is a great all-in-one package for customizing 1/10th scale onroad touring cars and FWD bodies.
The set consists of accurately fitting, 3D printed parts, and makes your life much easier when fitting bodies!
The set includes:
4 x Generous and strong magnets in 3D printed wrapping for easy positioning of the body, and for marking the holes.
1 x Pen in 3D printed part for marking the bottom cut line in heights of 7mm, 8mm, 9mm, 10mm, and 12mm
4 x 3D printed adapter parts to screw onto the wheel axles of the vehicle.
1 x 3D printed template with 67mm diameter to put on the adapters and to mark the wheel housings
1 x 3D printed template with 69mm diameter to put on the adapters and to mark the wheel housings
The exact use of the set you can watch in the ToniSport newsfeed on our Youtube channel!
Technical specificationTools: Body Reamers / Magnets -
MR33 Body Support Foam 5mm Set 10x50x5mm (4) 10x100x5mm (4)
The MR33 Body Support Foam Set for touring car bodies is made of thinner 2mm or thicker 5mm foam. Each set consists of a total of eight pads (on a sheet) that support the front of the body against the ram, providing improved aerodynamics and more stability.
The foam sizes included are 10x100mm (4) and 10x50mm (4), which are all self-adhesive for easy installation.
-
MR33 Body Support Foam 2mm Set 10x50x2mm (4) 10x100x2mm (4)
The MR33 Body Support Foam Set for touring car bodies is made of thinner 2mm or thicker 5mm foam. Each set consists of a total of eight pads (on a sheet) that support the front of the body against the ram, providing improved aerodynamics and more stability.
The foam sizes included are 10x100mm (4) and 10x50mm (4), which are all self-adhesive for easy installation.
-
Erstatningspen for Bittydesign Marker Line Kit
-
-
Bittydesign Magnetic Body Post Marker Kit Black
-
Our bodyshell stiffeners reduce the chance of a body tuck. They add very little weight (2.7g Mounted) for the strength gained on the rear bumper and wheel arch due to their lightweight effective design. Each type is designed at a different angle to fit the line of most 200mm and 190mm bodyshells, see ‘Selecting Your Bodyshell Stiffener’ below. They are perfect for any racer looking for a lightweight solution to reduce the chance of a body tuck during a run or even worse, the main finals.
Specifications & Contents
- Body Stiffener ‘Left’ (0.75g)
- Body Stiffener ‘Right’ (0.75g)
- Low Profile Screws x6 (0.2g)
- Reusable Plastic Packaging
Selecting Your Bodyshell Stiffener
Zoo Racing
Preopard (Type 4) – DBX (Type 3) – Hellcat (Type 4) – Baybee (Type 2)
Protoform
Tourismo (Type 4) – LTC 1 (Type 2) – P47 (Type 1)
Bittydesign
Extreme
Twister (Type 3) –
Montech
YSOT (Type 4) –
-
Ekstra papir til slipekloss for karrosserier
-
The body Marker Kit it’s a very usefull accessory that allow you to mark perfectly the lower cutting line of your On-road body shell, in particular Touring 1/10 and Pan-car 1/12.
The kit is made up of an ergal pen holder that depending on the position where you use it varies the floor height of the blade tip from 6mm up to 9mm.
-
Compared to the traditional but now obsolete tape paper, aspects and advantages of our Masking Liquid are easily found:
incredible time savings, the drawing up of liquid is really fast
possibility to easily reach every point on the surface of the body, even the edges and areas where the lexan has articulated forms
less usury of the cutting blade of your precision cutter
greater cutting precision due to the fact that the liquid, once dried, is semi-transparent and facilitates a lot the possibility to follow the lines of your drawing
no residue when removing the liquid (it may happen, however, if you continue to use an inadequate tape paper that after the removal of adhesive some glue residues remain on the surface of airbrushing; with Liquid Mask this will never happen)
greater accuracy of airbrushing, with our liquid the color smear are no longer a problem -
Compared to the traditional but now obsolete tape paper, aspects and advantages of our Masking Liquid are easily found:
incredible time savings, the drawing up of liquid is really fast
possibility to easily reach every point on the surface of the body, even the edges and areas where the lexan has articulated forms
less usury of the cutting blade of your precision cutter
greater cutting precision due to the fact that the liquid, once dried, is semi-transparent and facilitates a lot the possibility to follow the lines of your drawing
no residue when removing the liquid (it may happen, however, if you continue to use an inadequate tape paper that after the removal of adhesive some glue residues remain on the surface of airbrushing; with Liquid Mask this will never happen)
greater accuracy of airbrushing, with our liquid the color smear are no longer a problem -
Slipekloss for karrosserier
-
Reservepapir for Sanding Drum
-
Introducing a brand new product line from PROTOform: the Better Edge System. For every r/c enthusiast that takes pride in finishing off their concours-worthy race body, these products are for you.
The Better Edge sanding drum is our first product in this line. There has never been a product specifically made for r/c racers to finish off the perfect wheel-well. With the use of your handheld rotary tool, the Better Edge Sanding Drum will smooth out all of the imperfections left from cutting your lexan body with scissors. At 1.5” in diameter, it’s suitable for use on many scales of body: from 1:12 scale on up to 1:8 or even off-road bodies.
The drum’s red and black anodized aluminum finish and laser-etched PROTOform logos give it a trick look on your pit table. Each pre-assembled kit comes with a replaceable high-grade silicon carbide spiral sanding band, rubber anti-slip o-rings and a mandrel made from durable tool steel to prevent damage from your rotary tool’s chuck.
Give your r/c race body a better edge!